openculture tiny kit

Tiny · plug-in kit · EcoFlow DELTA 3 1000 Air

A power station and one panel

The smallest design here, with nothing to wire. One EcoFlow DELTA 3 1000 Air holds the inverter, the battery and the solar charger. One Jinko 650 W panel charges it through a single cable. It runs lights, a fan, a TV, a laptop and phones.

0
Solar
0
Battery
0
Output
0
Most it takes from solar

Wiring schematic

Solar DC Grid AC Home AC CAN to BMS, RJ45 Parallel link, RJ45 CT clamp lead
Select any block for its specs and wiring. Hover a block to trace its connections.

The layout at a glance

    Upgrade path

        Sizing checks

        Does the panel suit the unit’s solar input? Each check is worked out live from the datasheet numbers in the parts list, so it updates whenever the data does.

        10 °C

        Panels make more voltage in the cold, so voltage limits are checked at the coldest cell temperature you expect.

        Solar input power

          How these are worked out
          • Cold voltage: Voc × (1 + |temp. coeff.| × (25 °C − coldest °C)), compared with the unit’s maximum solar input voltage. Going over this can damage the unit. The temperature coefficient comes from the panel’s datasheet.
          • Working current and panel power: compared with what the unit accepts. Going over isn’t unsafe; the unit takes what it can and leaves the rest, which is called clipping.

          A sanity check for readers, not a substitute for the maker’s manual.

          Parts

          Tap a card to find it on the schematic